H44h swing check valve_Check valve_Valve_Product

H44h swing check valve

Product Overview

purpose:

Swing check valves are widely used in chemical, petrochemical, petroleum, paper, mining, power, liquefied gas, food, pharmaceutical, electronic industry and other fields with relatively clean media.

Installation method:

It is vertical and horizontal. It is recommended not to install it obliquely.

Product features:

The swing check valve is one of the check valve series widely used. The valve disc of the swing check valve is disc-shaped and rotates around the rotation axis, which makes the channel in the valve linear and has small flow resistance. It is suitable for large-diameter occasions with low flow rate and infrequent flow changes. The swing check valve is divided into three types: single lobe, double lobe and half lobe. These three types are mainly divided according to the valve caliber, It can effectively relieve the flushing of the valve disc and valve body seal when the medium flows backward, thus extending the service life of the valve.

Product material list:

标准规范
设计标准	GB/T 12236
结构长度标准	GB/T 12221
法兰连接标准	JB/T 79.1
检验与试验标准	GB/T 26480

主要零部件材料
阀体、阀盖	WCB、CF8、CF8M、鉻钼钢
阀瓣	WCB+D507、CF8+STL、 CF8M+STL、鉻钼钢+STL
销轴	2Cr13、304、316、鉻钼钒钢

Product parameters:

1.6MPA

公称压力PN	公称通径 DN	尺寸（mm)
公称压力PN	公称通径 DN	L	D	D1	D2	B	N-φ	H
1.6MPa	50	230	60	125	100	16	4-18	160
	65	290	180	145	120	18	4-18	177
	80	310	195	160	135	20	8-18	187
	100	350	215	180	155	20	8-18	202
	125	400	245	210	185	22	8-18	227
	150	480	280	240	210	24	8-23	263
	200	550	335	295	265	26	12-23	293
	250	650	405	355	320	30	12-25	330
	300	750	460	410	375	30	12-25	382
	350	850	520	470	435	34	16-25	430
	400	950	580	525	485	36	16-30	480
	450	1025	640	585	545	40	20-30	520
	500	1150	705	650	608	44	20-34	560

2.5MPA

公称压力PN	公称通径 DN	尺寸（mm)
公称压力PN	公称通径 DN	L	D	D1	D2	B	N-φ	H
2.5MPa	50	230	160	125	100	20	4-18	177
	65	290	180	145	120	22	4-18	183
	80	310	195	160	135	22	8-18	183
	100	350	230	190	160	24	8-23	217
	125	400	270	220	188	28	8-25	250
	150	480	300	250	218	30	8-25	270
	200	550	360	310	278	34	12-25	350
	250	650	425	370	332	36	12-30	41
	300	750	485	430	390	40	16-30	430
	350	850	550	490	448	44	16-34	450
	400	950	610	550	505	48	16-34	560
	450	1025	660	600	550	50	20-34	595
	500	1150	730	660	610	52	20-36	618

4.0MPA

公称压力PN	公称通径 DN	尺寸（mm)
公称压力PN	公称通径 DN	L	D	D1	D2	D6	B	N-φ	H
4.0MPa	50	230	160	125	100	88	20	4-18	177
	65	290	180	145	120	110	22	8-18	192
	80	310	195	160	135	121	22	8-18	192
	100	350	230	190	160	150	24	8-23	217
	125	400	270	220	188	178	28	8-25	259
	150	480	300	250	218	204	30	8-25	270
	200	550	375	320	282	260	38	12-30	340
	250	650	445	385	345	313	42	12-34	401
	300	750	510	450	408	364	46	16-34	423
	350	850	570	510	465	422	52	16-34	460
	400	950	655	585	535	474	58	16-41	490
	450	1050	680	610	560	524	60	20-41	540
	500	1150	755	670	612	576	62	20-42	618

6.4MPA

公称压力PN	公称通径 DN	尺寸（mm)
公称压力PN	公称通径 DN	L	D	D1	D2	D6	B	N-φ	H
6.4MPa	50	300	175	135	105	88	26	4-23	192
	65	340	200	160	130	110	28	8-23	207
	80	380	210	170	140	121	30	8-23	207
	100	430	250	200	168	150	32	8-25	235
	125	500	295	240	202	176	36	8-30	265
	150	550	340	280	240	204	38	8-34	297
	200	650	405	345	300	260	44	12-34	310
	250	775	470	400	352	313	48	12-36	357
	300	900	530	460	412	364	54	16-36	405
	350	1025	595	525	475	422	60	16-41	465
	400	1150	670	585	525	474	66	16-42	514
	500	1400	800	705	640	576	70	20-48	640

10.0MPA

公称压力PN	公称通径 DN	尺寸（mm)
公称压力PN	公称通径 DN	L	D	D1	D2	D6	B	N-φ	H
10.0MPa	50	300	195	145	112	88	28	4-25	192
	65	340	220	170	138	110	32	8-25	207
	80	380	230	180	148	121	34	8-25	235
	100	430	265	210	172	150	38	8-30	265
	125	500	310	250	210	176	42	8-34	313
	150	550	350	290	250	204	46	12-34	360
	200	650	430	360	312	260	54	12-36	420
	250	775	500	430	382	313	60	12-41	480
	300	900	585	500	442	364	70	16-42	530